|Cylinder Diameter||400-500 mm, 300-400 mm, 100-200 mm, 200-300 mm, >500 mm|
|Length of Cylinder||1000-1500 mm, 2000-3000 mm, 1500-2000 mm, 500-1000 mm, 0-500 mm|
|Uses||Coating , Flex Printing, Laminating|
|Total Indicator Reading||Less Than 0.01 mm|
|Color||As Per Requirement|
|Minimum Order Quantity||10 Meter|
|Type||Plastic Belting & Chain, Woven Wire Belting, Flat Wire Belting, General Purpose Belts, Hinge Metal Belting|
|Minimum Order Quantity||1 Meter|
|Thickness||5 to 20 mm|
|Material||Steel, Rubber, Nylon, PVC, PTFE|
|Type||Hinge Metal Belting, Plastic Belting & Chain, Woven Wire Belting, Flat Wire Belting, General Purpose Belts|
The superior construction finish provided in these cherry belts make these suitable for conveying materials requiring flame resistant as well as static conductive belts in industry sectors like:
· Metallurgical grain processing industries
· Used under condition of flammable/explosive environment like above coal mines
Conveyor Belts are available at market leading prices .Request
Some of the industry areas where these are used in include:
|Minimum Order Quantity||10 Meter|
|Material||PTFE, Rubber, PVC|
We are a name to be reckoned with in the sphere of manufacturing and export of fire resistant conveyor belts. It meets the Indian and international standards. Specifically designed these fire resistant conveyor belts possess self-extinguishing design and prevent fire from spreading over the entire belt. In order to ensure the fire retardant properties of these fire resistant belts, we conduct various testing according to ISO standards. These tests include drum friction test, flame test, electrical resistance test etc.
Our fire resistant conveyor belts are perfect to prevent fire risks in coal mines and reduce the maintenance of conveyors, which are prone to be damaged by flame at the blast furnaces of iron works. Apart from this, these fire resistant belts also find usage in thermal power plants, mining industry, coal cleaning plants and other industries.
Fire-resisting conveyer belt can be classified into two grades:
Hydraulic Power Pack Unit is suitable for all types of machines like, Rotogravure Printing Machine, Lamination Machine / Coating Machine, Slitter Rewinder Machine, Doctoring Rewinding Machine, Paper Machinery, Textile Machine like Batching Machine, Inspection Rewinding Machine and many more. KEW Hydraulic Power Pack units are used to automatically guide all types of flexible materials of any width, at any speed, under any load. Completely self-contained, with an integral air pump, these units eliminate the need for additional air regulators or plant air. Modular construction and sub plate-mounted components provide maximum ease of servicing. Air Pressure Power Units are available in models from 1/4 H.P. to 3 H.P.
Web - Aligner (Power Pack) Unit Complete With:
0.5 H.P. Motor
Air Pipe - 5 Mtr.
Oil Pipe - 5 Mtr.
Sensor - 1 pcs
Adjuster -1 pcs.
Air Filter -1 pcs.
Oil Filter - 1 pcs.
Hydraulic Cylinder size 4", 6" & 8" strock - 1 pcs.
In the specially designed non-contact Air flow sensors, air is expelled from two opposing orifices. The differential air pressure is use to detect lateral wandering of the material in process. The Airflow sensors are self cleaning & fitted with fine adjustment mounting bracket.
It works on hydraulic pressure. It actuates the correcting frames. Available in different size from 2" to 18" stroke length.
Electro - Hydro Web Aligner (Power Pack) Unit:
Speed of Unit 250/min
Variation of the film Winding is 0.5
M.S.Tank and M.S.Plate
Electronic of the film Photocell sensor for edge.
Electronic 0 - 5 HP AC Motor.
Electrical Panel Board for Operate the complete Unit.
Hydraulic Cylinder - Adjuster - Oil Pipe.
Technical Specifications for Power Pack Unit:
Motor rating (3 phase, 50 Hz) 0.5 HP
Pump flow rate 3.4 l/min
Tank capacity 17 liters
Oil type Castrol EP 32
Line pressure 14 bar
Max. Operation force (50.8 mm dia. Cylinder) 260kg
Follow-up speed --
Max. At 3.4 l/min 30mm/sec
At 5.8 l/min --
Air sensor air pressure 5 to 28 mbar, infinitely adj.
Weight including oil 40kg approx
|Minimum Order Quantity||1 Piece|
|Medium Used||Oil, Water|
|Application||Food Process Industry, Power Generation, Hydraulic and Industrial Process, Mining & Construction Industry, Pharmaceutical industry|
The shell and tube heat exchanger is made up of a bundle of parallel heat exchanger tubes held in place with tube sheets and placed into a shell. The heat exchange always takes place between two fluids through the heat exchanger tube wall. There are quite a variety of flow options for shell and tube heat exchangers, as discussed in the following sections. In all of the configurations for shell and tube heat exchangers, one fluid passes through the tubes (the tube side fluid) and the other passes through the shell (the shell side fluid). The choice of shell and tube heat exchanger configuration affects the overall heat transfer coefficient and thus also affects the rate of heat transfer and the heat exchanger tube surface area needed.
The two fluids that are exchanging heat in a shell and tube heat exchanger are referred to as the tube side fluid (which goes through the heat exchanger inside the tubes) and the shell side fluid (which goes through the heat exchanger in the shell, outside the tubes).
Important components of a shell and tube heat exchanger (in addition to the obviously important tubes and shell) are the tube sheets, baffles, end channels for the tube side fluid, and inlet outlet nozzles for both the shell side fluid and the tube side fluid. These various components are shown in the diagram of a straight tube, two pass, shell and tube heat exchanger at the left. As shown in the diagram, the tube sheets serve to hold the tubes in place in a "tube bundle" (see diagrams in next section), and also can serve as baffles to create turbulence and a more consistent residence time for the shell side fluid. The end channels distribute the tube side fluid and create either a transition to the outlet nozzle or a means to send the tube side fluid back to the other end of the heat exchanger, as in the diagram above.
The number of passes refers to the tube side fluid. The shell and tube heat exchanger is commonly made in single pass, two pass and four pass configurations, although custom multipass heat exchangers with yet another number of passes are also available. A U-tube heat exchanger is automatically a two pass heat exchanger, because of the heat exchanger tube U turn as shown in the diagram above. The first image in this article is a straight tube, two pass heat exchanger. Instead of a U-tube bundle, the end channel and an internal horizontal baffle, are used to cause the two passes. A schematic diagram for a straight tube, one pass heat exchanger is shown in the previous section.
Food, Beverage Dairy
Power Electrical Generation
Metals and Mining
We are involved in manufacturing and supplying an extensive array of Reel Stretch Wrapping Machine. These machines are designed exclusively for heavy loads that require high wrap force. Our Stretch Wrap Machine is quite simple and easy to use.
stretch wrapping machine is an ideal machine for wrapping pallets, including high-cube containers, ready to be exported in containers. Also, the stretch film packing is used for protection against perforation, moisture, protection against corrosion from sea air, dust etc. It is ideal for packing products like textile cone yarn, castings, light heavy engineering goods, pharmaceutical products, electrical home appliances, sacks containing grains, chemicals, fertilizers, tins containing, fruit pulp, paint, liquids, lubricants, jumbo bags containing products like: activated carbon, granules, powders
400 kgs *
600 mm *
Roller Height (above GL)=
220V, Single phase, 50Hz
LLDPE - Stretch Film
250 to 500 mm
|Minimum Order Quantity||1 Piece|
|Automatic Grade||Automatic , Manual|
|Max Print Area (Inch X Inch)||110''|
|Object to be Printed||Fabric|
|Minimum Order Quantity||1 Millimeter|
|Usage||Office Use, Printing Industry|